Eight Principles that Security Guard Need to Adhere to, What Administrator Need to Know!
Inspection and inspection is one of the tasks that administrators of urban areas and gardens must perform, and the staff can find safety hazards in time through the guard tour to conduct patrol inspections, rectify them in time, and reduce and eliminate accidents in the bud. Enterprises also need touring inspections in the production process, and the touring inspections require the administrators to give instructions to the inspectors, and the guidance needs to implement the "Eight Principles."
Principle 1: Be careful and meticulous
The staff must remember that when using the guard tour, the patrol inspection needs to be serious and thorough, if the inspection is careless and the inspection is not taken seriously, it will be difficult to find safety hazards during the patrol inspection.
Principle 2: Scientific Method
The staff used the guard tour to check on the spot. During inspections, scientific methods are required, with the aid of scientific work, methods such as "seeing, listening, and testing" are used to inspect hidden dangers.
Principle 3: In-depth inspection
What is needed in the roving inspection is to have an in-depth understanding of the inspection points and conduct inspections. It is necessary to use scientific means to find out the small hidden dangers in the device, use the guard tour to record, and report to the management center in time, so that it can be treated in time.
Principle 4: Implement the responsibility system
When the staff use the guard tour to inspect, it is to discover hidden dangers and prevent the occurrence of accidents, this requires the staff to implement this responsibility and be responsible for it.
Principle 5: Persist in the long-term and form a mechanism
Security inspections cannot be lazy. After the superior came to check, it was tight for a while, and when the leader left, it was loosened, and no one was in charge anymore, and no one asked, the consequence of this practice is to harm others and self. Safety inspection is a long-term work, and you should never tighten and loosen. Therefore, we must persist in the long-term, form a mechanism, and persevere.
Principle 6: Persist in beginning and ending, investigation and correction
The purpose of investigating hidden dangers is to promote rectification, if the detected hidden dangers cannot be rectified in time and preventive measures are not taken, then the patrol inspection will become the ear of the deaf. Therefore, the inspection must have a beginning and an end, and the problems found must be rectified immediately in order to eliminate the hidden dangers.
Principle 7: Regular inspections
Tour inspection is an iron system, any post and any device must be regularly inspected regularly, the time arrangement of the tour inspection must be implemented in accordance with the rules and regulations. If you do something irregularly and arbitrarily, it will inevitably cause some hidden dangers that cannot be discovered in time, if you delay the treatment, it will surely lead to future troubles.
Principle 8: Insist on cross docking
Itinerant inspection points should be cross-connected vertically and horizontally to prevent missed inspections. When personnel from adjacent posts make patrol inspections, extend an inspection point to the inspection points of the left, right, front and rear adjacent posts, and implement cross-point extension and docking to achieve vertical and horizontal all-round patrol inspection.
In short, as long as everyone follows the patrol inspection system to form an atmosphere of full responsibility, everyone takes his own responsibilities and performs his duties, our company will eliminate hidden dangers and prevent accidents in time, safety management will continue to reach new levels and reach new levels.
